Lighting

Overview

Rhino offers a great selection of native artificial lighting options and this article will explain which of them can be successfully utilized within Enscape.

Tip
It is beyond the scope of this article to describe all the various ways to create lights in Rhino and for a deeper understanding of how Rhino lights function, we would recommend referring to the official Rhino support pages, here. Please note that Rhino does not support IES lighting.
NOTE
It is worth noting at this point that if you have Auto Exposure enabled in the Enscape Settings window, and at the same time you only have a single light source placed in your scene, you will not see any effect from the artificial light because the Auto Exposure compensates for the light source intensity. Furthermore, if you have VRay installed, you will need to make sure that Rhino, and not VRay, is selected as the render engine in Rhino’s Render Properties, otherwise you will not see the Rhino Light controls. The last thing of note is that currently Enscape is not supporting IES Lighting in Rhino.

The quickest and easiest way to open and start working with lights in Rhino is to type ‘Lights‘ in the Rhino command line, after which Rhino’s Lights panel will open.
You can also open the Lights panel in Rhino via the Rhino Panels menu.

The Lights panel opens with two default lights already listed. These are the Sun and Skylight and are covered elsewhere in our Knowledgebase.
To place an artificial light in Rhino, click the + sign near the bottom of the Rhino Lights window and a menu will appear that lists all the different types of lights available in Rhino. Not all of these lights listed are support by Enscape however.

Rhino's Lights Panel

Rhino's Lights Panel

Rhino Lights Menu

Rhino Lights Menu

The lights that are available in Enscape are:

  1. Point Light – Emits light equally in all directions from a single point in space
  2. Spot Light – Directs a narrow beam of light with Falloff
  3. Linear Light – Imitates a fluorescent light tube
  4. Rectangular Light – Inserts a rectangular light object that emits light from an array of points in a set direction
Types of Light

Types of Light

When you place a light in the scene, it becomes listed in Rhino’s Lights panel along with some of the light’s properties, such as it’s intensity, color, and also on which layer in Rhino it is residing.

Rhino's Lights Panel

Rhino's Lights Panel

When right-clicking a light in Rhino’s Light panel, you are given the option to show the lights Properties panel, and this offers some extra options for a light if available for that light type. Any changes to a light’s properties will be instantly seen in Enscape as long as Enscape’s Live Update option is enabled.

Light Properties

Light Properties

Point Light

Here, you can see a point light has been inserted into a scene (displayed in yellow) and it’s intensity and color have been adjusted from the Light’s Properties panel. These changes will be visible in the Enscape window instantly if Enscape’s Live Updates are enabled.

Point Light in Scene

Point Light in Scene

Spot Light

When placing a Spot Light in Rhino, the first click will define the lights cone base and the second click will define the cone direction. After placing the light Rhino provides a number of control points for you to adjust the light.
Furthermore, once placed, spotlights can have the Color, Intensity, Shadow intensity, and Spotlight hardness adjusted.

Spot Light

Spot Light

Linear Light

Linear lights are easily placed with two clicks, the first click will define the start point and the second click defines the length of the linear light.

Linear Light

Linear Light

Rectangular Light

Rectangular lights are easily placed with three clicks, the first click will define the target point and the second click defines the light length, the third click defines the light width. The direction that the light is being emitted is indicated by a small arrow that can be seen attached to the rectangular plane.

Spot Light

Spot Light

Self-Illuminated Materials

There is one other type of lighting option that is available in Rhino that has not been mentioned.
Self-Illuminated materials, that are not available via Rhino’s Light panel section, must be considered an additional lighting option.

Self-Illumination will act in a similar way as a Point Light but instead of emitting that light from one point, the light is emitted from the entire surface where the material is applied.

In the example screenshot below you can see that a cube object has been placed in the scene, highlighted in the Rhino Viewport as a yellow cube. This object initially requires that a default material is assigned to one or all of it’s surfaces and that the Material Type is set to Custom in the Rhino Material panel, or to Enscape if you want to use the Enscape Material Editor to adjust the emissive material.
Under the Advanced Settings section of the Material panel, make sure that Self-illumination is checked. Then set the Emission color.

Additionally, if editing the material in the Enscape Material Editor, then you can also adjust the materials luminosity.

To see the emissive surface in action, set the time of day in the Enscape window to night hours.

Self-Illumination with green applied as the emission color.

Self-Illumination with green applied as the emission color.

Watch the following to see a light being placed, colored, and the Intensity being changed in Rhino.


    Do you need help with Enscape? Please contact our technical support here
    or send request directly through Enscape. Don't know how? Check this article.

    Was this article helpful?

    YesNo

    Please provide us short feedback: (required)

    If you require a response to your feedback, then you will need to provide your email address below (optional)*:

    *In the framework of our postings on our website, we may ask you for your feedback on the respective posting. Here, only the input of your feedback is required. The provision of further data, such as your e-mail address, is optional. If you provide further data, such as your e-mail address, we will use this to ask you questions about the feedback, if necessary, and thus to improve our services even more specifically. The legal basis for data processing is your consent (Art. 6 s. 1 p. 1 lit. a GDPR). The granting of consent is voluntary and is given when providing the optional email address which can be revoked at any time with effect for the future. Your data will be deleted when the processing is no longer necessary to fulfill the purpose, but at the latest with the revocation of your consent.